Filter
Top Products
4
LOADING AND UNLOADING FILM
LOADING FILM
1. Push the Back Cover Release (16) to open the Back Cover (15); the
Film Counter (1) will automatically reset to “S”.
2. Insert standard 35mm film into the Film
Chamber (11) by placing the film onto the Film
Take-up Spool (14).
3. Turn the Film Advance Wheel (13), while
making sure the film engages properly in the
gear of the Film Sprocket Wheel
(12).
4. Close the Back Cover (15).
5. Turn the Film Advance Wheel
(13), then press the Shutter
Release button (2).
6. Repeat step 5 until the Film
Counter (1) indicates “1”.
UNLOADING FILM
1. After taking the last picture, press and hold the Film Rewind button (7)
on the bottom of the camera.
2. Lift the handle of the Film Rewind
Crank (6) outward, then turn
clockwise to rewind the film into
the film case until no pressure is
felt.
3. Push the Back Cover Release
(16) to open the back cover (15),
remove film and develop.
+
–