Filter
Top Products
12
NOTE
To change the programmed subject setting (when the user
mode is set to Program), or make changes to exposure, white
balance, or other advanced settings, press the MENU button
to see the Viewfinder menu. (See your User’s Guide for
details.)
4
Look straight through the viewfinder and center
your subject within the cross-hairs.
5
Push the
T
(telephoto) button to zoom in on your
subject, or the
W
(wide angle) button to zoom out.
6
Hold the shutter button halfway
down to lock the auto focus and
exposure.
7
Press the shutter button the rest of
the way down to take the picture.
8
Hold the camera still until the shutter snaps, then
release the shutter button. When the photo capture
light stops flashing, your image is saved.
CAUTION
If you set the camera down while the light is still flashing, do it
carefully. The camera may lose your image if you set it down
too hard.
quickrefset.book Page 12 Thursday, April 20, 2000 3:36 PM