Filter
Top Products
Operation Instruction
© 2009 EverFocus Electronics Corp
Please read this manual first for correct installation and operation. This manual should be retained for
future reference. The information in this manual was current when published. The manufacturer
reserves the right to revise and improve its products. All specifications are therefore subject to change
without notice.
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or
by any means without written permission of the EverFocus Electronics Corporation.
Precautions
1. Do not place any object on top of the cover.
2. Be careful when handling the camera, to prevent any damage do not drop it or subject it
to strong shock or vibration. Do not disassemble it or attach it on an unstable base.
3. Install the camera away from TV or radio transmitters, magnets, electric motors,
transformers and audio speakers because the magnetic fields generated from these devices
may distort the video image.
4. Install the camera away from heaters, or other heat generating devices as the high
temperature could cause deformation, discoloration or other damage to the camera.
Install the camera at where the temperature range will stay between -40°C to 50°C (-40°F
to 122°F).
5. Never aim the camera at the sun or other extremely bright objects whether it is in use or
not.
6. Do not touch the surface of CCD sensor directly with your fingers. Use a soft cloth to
remove any dirt from the camera body. If necessary, use lens tissue or a cotton tipped
applicator and ethanol to clean the CCD sensor and the camera lens. When the camera
is not in use, protect the surfaces covering the lens and IR emitters.
7. All warnings on the product and in the operating instructions should be adhered to.
8. Do not use attachments not recommended by the camera manufacturer as they may cause
hazards.
9. Do not allow anything to rest on the power cord. Do not locate this device where the cord
may be abraded or may cause a hazard by persons walking on it.
10. Do not overload wall outlets and extension cords as this can result in fire or electric
shock.
11. Never push objects of any kind into his appliance through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in fire, electric shock or
damage to the camera.
12. Refer all work related to the installation of this product to qualified service personnel or
system installers.