Filter
Top Products
1
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with
the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and
the camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do
not use complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings. This camera is suitable for indoor operation only. Use the camera at temperatures
within -10ºC ~ +50 ºC (14 ~122 ) and humidity between 20% and 80%. This device is
not rated as submersible. The input power source is 12VDC.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera
plus any wind, snow, ice or other loading, and securely attach the camera to the mounting
surface using screws and anchors which will properly support the camera. If necessary (e.g.
when mounting to drop ceilings) use a safety wire to provide additional support for the
camera.
Table of Contents
Product Overview………………………………………………………………..1
Main Features……………………………..……………..…….…………………1
Content List……………………………………………………………………… 2
Specifications………………………………………………………….………… 3
Dimensions………………………………………………………………………. 3
Installation……………………………………………………….……………… .4
Product Overview
The EverFocus ECD360AV is an indoor color camera with plastic housing, clear
dome to pass the maximum amount of light, and integral dome liner to conceal the
viewing direction. The 3-axis positioning system allows convenient wall or ceiling
mounting without the need for brackets, and permits the lens to be aligned in
virtually any viewing direction. Equipped with a Sony 1/3” Super HAD high
resolution 540 line sensor and 3.5~8mm varifocal DC iris lens, the field of view can
be readily adjusted to suit the application while the auto iris function adapts to a
wide range of lighting conditions. The camera draws only 150mA from a 12VDC