Filter
Top Products
6
INSTALLATION
1. Connect the video output of the camera to a color monitor or other video device through a 75
ohm type coaxial cable with BNC female connector at camera end.
2. Plug the power cord to the outlet. Power indicator LED should light if the power source is
properly connected.
3. Remove the lens cover cap from the top of the camera for adjusting the vari-focal lens.
4. Once the image appears on the monitor, adjust the focus and diaphragm of the lens to
obtain the best picture.
5. Mount the camera on the mounting bracket by using the mounting hole on the top and bottom
of camera casing.