Filter
Top Products
1
6. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the
camera lens.
7. Do not operate the camera beyond the specified temperature, humidity or
power source ratings.
Use the camera at temperatures within 0℃~ 50℃/32℉~122℉ and humidity between 20%~
80%. The input power source is 12VDC/24VAC.
PREFACE
EPD200 is compact, full functioned CCD Color Cameras for indoor pendent mount. The
dome camera is designed with advanced digital processing circuitry for high resolution 1/3"
CCD sensor, it has DIP switch for FL ON/OFF, BLC ON/OFF, AGC ON/OFF. The dome
camera uses a vari-focal auto iris lens for discreet surveillance or close-up viewing and it
features with iris level volume control for the best viewing quality.
FEATURES
z 1/3” SONY CCD pick up device for more than 380 TV lines of horizontal resolution
z The high sensitivity of 1.0 Lux/F=1.2 is achieved by using 1/3” SONY CCD
z The Electronic Shutter and AGC functions allow the camera to be used in environment
with varying light levels
z Built-in Vari-Focal lens(optional)
z With manual PAN mechanism up to 90 degree
z FL, BLC, AGC On/Off switchable
z Compact size
z System available for NTSC or PAL
CONTENT LIST
1. Camera Unit
2. Operation Instructions (this document)
3. Hex Wrench
4. Power Extension Cable
5. Video Cable for testing Video Connector
OPTIONAL ACCESSORY
• EN220 5.6-inch LCD Test Monitor