EverFocus EPTZ3100 Security Camera User Manual


 
63
3.6.2. ALARM OUTPUTS
Press Enter key of keyboard to enter ALARM OUTPUTS sub-menu. (see diagram 3.26)
(diagram 3.26)
a. OUTPUT NUM: Select Output number from 1~2.
b. INPUT1: Select YES to enable Alarm input 1 for the alarm output selected. Select NO
to disable Alarm input 1.
c. INPUT2: Select YES to enable Alarm input 2 for the alarm output selected. Select NO
to disable Alarm input 2.
d. INPUT3: Select YES to enable Alarm input 3 for the alarm output selected. Select NO
to disable Alarm input 3.
e. INPUT4: Select YES to enable Alarm input 4 for the alarm output selected. Select NO
to disable Alarm input 4.
f. MOTION: Select YES to have alarm output triggered when a motion event is detected.
Select NO to disable this function.
g. SYSTEM ERROR: Select YES to have alarm output triggered when system error
occurs. Select NO to disable this function.
h. REMOTE: Select YES to have alarm output triggered when RS485 failure occurs.
ALARM OUTPUT TRIGGER
OUTPUT NO 1
INPUT1 YES
INPUT2 YES
INPUT3 YES
INPUT4 YES
MOTION NO
SYSTEM ERROR NO
REMOTE NO
RETURN
ALARM INPUTS
<┘
ALARM OUTPUTS
<┘
MOTION DETECT
<┘
EXIT