Fisher VPC-C40 Camcorder User Manual


 
English 126
CHECKING THE REMAINING CARD MEMORY
You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see “Possible No. of
Images/Possible Shooting Time/Possible Recording Time” on page 158.
Checking the remaining number of images and video recording time
1 Set the main switch to REC, and turn
on the camera (page 22).
h The remaining number of images
appears in the upper left of the LCD
monitor.
h The remaining video recording time
appears in the upper right of the
LCD monitor.
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of
images or the remaining video
recording time is “0”, you cannot capture any more images. To capture
more images, either install a new card, or save the images to a
computer and then erase them (page 77) from the card.
h When the remaining number of images or the remaining video
recording time is “0”, it may be possible to capture a few more images
by setting a lower resolution setting (pages 51 and 52), or selecting a
different image quality setting.
For audio data
1 Set the camera to the audio
recording mode (page 37).
h The remaining audio recording
time is shown.
00:00:5812
Remaining number of images
Remaining video
recording time
00:16:0012
Remaining time