Filter
Top Products
19 English
INSTALLING THE BATTERY PACK AND CARD
3 Close the card cover.
<When removing the card...>
h To remove the card,
press it down, and
then release. The
card will protrude
slightly, and you can
then pull it out.
CAUTION
Do not attempt to forcibly remove the card.
iNever remove the card when the multi-indicator is flashing red. In doing so,
you risk losing the data stored in the card.
HINT
When not using the camera for a long time, remove the battery pack.
iA small amount of power is still used even if the camera is turned off, and it
is therefore recommended that the battery pack be removed from the
camera if it is not going to be used for a long time. Note that when the
battery pack is removed for a long period, the time and date settings may
be cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
1Open
3Pull out
2Push