Filter
Top Products
Troubleshooting
Problem Cause Solution
Photos are blurry Lens may be dirty or smudged Clean the lens with a soft cloth.
Camera moved when picture
was taken
Try to keep the camera steady when
you take pictures.
Flash may not have
been charged
Wait for fl ash to fully charge before
you take a picture .
You are too close to your subject The focus range is from about
4 ft. (1.2 m) - infi nity
Cannot transfer pictures to
the computer
USB cord may not be
properly connected
Check cord connections on both
your camera and your computer.
Product functions erratically
or does not function at all
Static electricity may temporarily
stop the electronic function of
the camera and cause picture
loss. For example, walking
across the rug and touching
the camera may create
static electricity.
Reset the electronics by removing
the batteries and putting them back
in the battery compartment.
Batteries are weak
or exhausted
Replace the worn batteries with four,
new “AAA” (LR03) alkaline batteries.
22