Filter
Top Products
CommandPost Installation
User Guide
7
1.
Connect the square end of the USB cable to the USB
connector on the rear panel of your CommandPost
controller.
2.
Connect the rectangular end of the USB cable to
your computer’s USB port.
Note
You can use CommandPost with a USB hub so long
as the hub provides power to the controller unit.
Software Installation
The CommandPost CD contains software for both Mac-
intosh and Windows. You can install the software on
either or both platforms.
You should deactivate any virus protection software
you might have running prior to installing the software.
Following installation, you can restart the virus protec-
tion software.
1.
Insert the CommandPost CD in your CDROM drive.
2.
Do the following to install the software:
On
Macintosh
, locate the
CommandPost 2.0
Installer
icon in the CD window, then double-click
the icon to start the installation program.
On
Windows
, choose
Start|Run
to display the Run
dialog box.
a.
Click
Browse
.
b.
Locate the CommandPost CD in
My Computer.