FujiFilm 16199188 Camcorder User Manual


 
43
More on Photography
Continuous Shooting (Burst Mode/Bracketing)
O
O
AE BKT
AE BKT
Press the selector left or right to highlight a
bracketing amount. Each time the shutter but-
ton is pressed, the camera will take three shots:
one using the metered value for exposure, the
second overexposed by the selected amount,
and the third underexposed by the same amount
(the camera may not be able to use the selected
bracketing increment if the amount of over- or
under- exposure exceeds the limits of the expo-
sure metering system).
W
W
ISO BKT
ISO BKT
Press the selector left or right to highlight a brack-
eting amount. Each time the shutter is released,
the camera will take a picture at the current sensi-
tivity (P 83) and process it to create two additional
copies, one with sensitivity raised and the other
with sensitivity lowered by the selected amount
(regardless of the amount selected, sensitivity will
not exceed ISO 800 or fall below ISO 200).
X
X
FILM SIMULATION BKT
FILM SIMULATION BKT
Each time the shutter button is pressed, the cam-
era takes one shot and processes it to create three
copies with different P FILM SIMULATION set-
tings (P 85): c PROVIA/STANDARD for the first,
d Velvia/VIVID for the second, and e ASTIA/
SOFT for the third.
Y
Y
DYNAMIC RANGE BKT
DYNAMIC RANGE BKT
Each time the shutter button is pressed, the cam-
era takes three shots at different U DYNAMIC
RANGE settings (P 85): A 100% for the first,
B 200% for the second, and C 400% for
the third (N ISO can not exceed 3200; values less
than 400 are not available when O is selected for
O IMAGE SIZE).