Filter
Top Products
12 First Steps
Inserting the Battery and a Memory Card
4
Close and latch the battery-chamber cover.
Close the cover (
q
) and then close the latch
(
w
) and safety lock (
e
).
Q Before closing the cover, con rm that there is
no dust, sand, or other foreign matter on the
water-resistant seal or adjacent surfaces.
Q When closing the battery-chamber cover, do
not subject it to excessive horizontal forces.
Failure to observe this precaution could cause the water-resistant seal to be-
come misaligned, allowing water into the camera.
Con rming That the Cover Is Latched
Con rming That the Cover Is Latched
Make sure that the strap is not caught in the cover and that
both the latch and safety lock are closed.
■
■
Correct
Correct
The yellow sticker is not visible.
■
■
Incorrect
Incorrect
The yellow sticker is visible.
q
w e