Filter
Top Products
– 4 –
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR QuickSnap Marine
The basic color is green.
5. PROCESSING LABORATORY HANDLING
Basic handling procedures are no different from those for other 35 mm films.
Since FUJICOLOR QuickSnap Marine is designed to use the "00" "0" & "E" frames for image
exposures, it is important to exercise caution relative to the film leading end.
Film Cartridge Design
6. POINTS PERTINENT TO CONTINUOUS REEL, HANGER AND
MINILAB PROCESSING
The procedures used for film tongue extraction, cutting and check tape application are almost
the same as for QuickSnap Super. Follow the handling method shown in 1 to 3 below.
The film extraction length, leading end cut length and check tape length all together, must be
no longer than 120 mm. The film should not be extracted from the cartridge beyond 120 mm.
7. PROCESSING AND PRINTER CONDITIONS
7-1 Processing Conditions
Process the film with CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S, C-41 or equivalent process-
ing chemicals.
7-2 Automatic Printer Conditions
Use the same channel setting as for SUPERIA X-TRA 800.
8. PARTS RECYCLING
In line with Fujifilm's efforts to protect the environment, photofinishers are kindly urged to send
the used camera bodies and waterproof cases to Fujifilm for recycling.
Ref. No. AF3-147E
(
EIGI-03.1-HB•1-1¸
)
Printed in Japan
FUJI PHOTO FILM CO., LTD.
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
NOTICE The data herein published were derived from materials taken from
general production runs. However, as Fujifilm is constantly upgrading the
quality of its products, changes in specifications may occur without prior notice.