FujiFilm FinePix A205 Digital Camera User Manual


 
39
Advanced
Features
38
FRAME
1Press “d” or “c” to select the frame (file) to be
erased.
2Press the “MENU/OK” button to erase the
currently displayed frame (file).
To erase another image, repeat steps 1 and 2.
When you have finished erasing images, press the
“BACK” button.
!
Pressing the “MENU/OK” button repeatedly erases
consecutive images. Take care not to erase an image by
mistake.
!
Protected frames (files) cannot be erased. Unprotect the
frames before erasing them (P.42).
ALL FRAMES
Pressing the “MENU/OK” button erases all the
frames (files).
!
To cancel the erasing of frames once it is in progress, press
the “BACK” button. Even if you stop the procedure
immediately, some frames (files) will be erased.
!
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (P.42).
To stop the procedure mid-way
Press the “BACK” button to stop erasing all the
frames. Some unprotected frames (files) will be left
unerased.
01 02
If the “” message appears, press the “MENU/OK” button again to erase the
frames (files).
!
Even if you stop the procedure immediately, some frames
(files) will be erased.
1Turn the Mode switch to “w”.
2Press the “MENU/OK” button.
2
Press “d” or “c” to select “u” DPOF.
1
01 02
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card. The recorded specifications include information on which frames
are to be printed.
This section gives a detailed description of how to order your prints with the FinePix
A205/A205S/A210.
On the FinePix A205/A205S/A210, you can specify multiple prints per image.
Note that some printers do not support date and time imprinting or specification of the
number of prints.
Note that the warnings shown below may be displayed while you are specifying the
prints.
«
(P.38)
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥ (P.40)
If you insert an xD-Picture Card that contains frames specified for printing on
another camera, those print specifications are all reset and replaced by the new print
specifications.
(P.73)
Up to 999 frames can be specified on the same xD-Picture Card.
HOW TO SPECIFY PRINT OPTIONS
(
DPOF
)
HOW TO SPECIFY PRINT OPTIONS
(
FRAME SET/RESET
)
u
DPOF SET FRAME
PLAYBACK MENU
o ERASING SINGLE/ALL FRAMES
PLAYBACK MENU
Continued