Filter
Top Products
132
Installation on a Mac OS X
Pre-installation checklist
ZHardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
*
1
PowerPC, Intel processor loaded
*
2
Models with a USB port as a standard feature
*
3
Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable. The software may not operate correctly if you use an extension
cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
Compatible Mac
*
1
Power Macintosh G3
*
2
, PowerBook G3
*
2
,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini
Operating System Mac OS X (compatible with version 10.3.9 to 10.4.8)
RAM 256 MB minimum
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display
800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
Internet connection
*
3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended