Filter
Top Products
51
4
1
➀
Use the “ab” button to select “FRAME SET/
RESET”.
➁
Press the “MENU/OK” button.
●
!
To exit the menu, use the “d” or “c” button to select
“
[BACK” and then press the “MENU/OK” button.
●
!
Up to 99 prints can be specified for each frame, and
the maximum number of frames for which prints can
be specified on one SmartMedia is 999.
●
!
“TOTAL” shows the total number of prints specified.
2
Use “
d
” or “
c
” to select the frame to be
specified.
➀ ➁
S
DPOF FRAME SET
/
RESET
PLAYBACK MENU
50
2
This function allows you to select whether or not
the date of shooting is included on the print.
➀
Set the Mode dial to “D”.
➁
Press the “MENU/OK” button to display the
menu on the LCD monitor.
➂
Press “dc” button to select “ DPOF”.
➀
Use the “ab” button to select “ DATE”.
➁
Press “d” or “c” button to specify “DATE ON”
or “DATE OFF”. This setting is then valid for
all the prints until the setting is changed.
●
!
Before specifying any other settings, first specify
whether date is to be shown or not.
●
!
If you switch the camera off after selecting “DATE
ON”, the setting reverts to “DATE OFF”.
1
➀ ➁
➂
➀ ➁
S
DPOF DATE SETTING
PLAYBACK MENU
●
!
To exit the menu, use the “d” or “c” button to select
“[BACK” and then press the “MENU/OK” button.