Filter
Top Products
63
Settings
4
62
1Press “a” or “b” to select “TIME DIFFERENCE”.
2Press “c”.
WORLD TIME
(
TIME DIFFERENCE
)
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
1
2
Press “d” or “c” to change between “å HOME”
and “ß LOCAL”.
To set the time difference, select “ß LOCAL”.
å HOME : Your home time zone
ß LOCAL: Your destination time zone
1Press “d” or “c” to select +, –, hour and minute.
2Press “a” or “b” to correct the setting.
h Available time setting
–23:45 to +23:45 (in 15-minute increments)
01 02
3
01 02
When this function is enabled and the camera is
not used for 60 seconds, the screen temporarily
turns off (sleep mode) and the viewfinder lamp
blinks at 1 second intervals to save power. If the
camera remains unused for 2 or 5 minutes, it is
turned off. Use this function when you want to get
the maximum possible running time from your
battery.
●
!
The Power save setting is disabled during automatic
playback and when a USB connection is being used.
POWER SAVE SETTING
FORMAT
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture Card.
●
!
If “7”, “w”, “0” or
“
-” appears, see P.91 for information
before formatting the xD-Picture Card.
◆
To restore power to the camera
◆
When the Auto power off function has shut the
camera down (after 2 or 5 minutes):
1 Turn the camera off briefly.
2 Turn the camera back on again.
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
SET-UP
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 or 5 minutes).
✽ How to use the SET-UP screen (➡P.60)
0102
01 02
Continued