Filter
Top Products
95
7
94
7.1 CAMERA CONNECTION
7
Viewing
Images
7.1.1 Using the AC power adapter
(
sold separately
)
Always use a FUJIFILM AC Power Adapter AC-5VH/AC-5VHS (➡P.109).
Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading
photographed images to the computer. Using the AC power adapter also allows you to take pictures and play
back images without worrying about depleting the batteries.
●
!
Only connect or disconnect the AC power adapter when the camera is switched off.
Connecting or disconnecting the AC power adapter while the camera is switched on temporarily interrupts the power supply to the
camera, so that images or movies being shot at the time are not recorded. Failing to switch the camera off first can also result in
damage to the xD-Picture Card or malfunctions during PC connection.
Check that the camera is switched off. Plug the AC
power adapter connector into the “DC IN 5V” socket
and then plug the AC power adapter into the power
outlet.
●
!
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
●
!
The shape of the plug and socket-outlet depends on the country
of use.
●
!
See P.114 for notes on using the AC power adapter.
DC IN 5V socket
Connecting the AC power adapter does not allow you to charge the Ni-MH batteries. Use the optional
charger (➡P.109) to charge the Ni-MH batteries.
6.4 INSTALLATION ON A Mac OS X
14
Launch “Image Capture” from the “Applications” folder.
15
Change the ImageCapture settings.
(OS X 10.1.5)
(1) Select “Other...” from “Hot plug Action”.
(OS X 10.2 or later)
(1) Select “Preferenes...” from the “Image Capture” menu.
(2) Select “Other...” from “When a camera is connected, open”.
17
Quit ImageCapture.
16
Select “FPVBridge” from “FinePixViewer” folder in the
“Applications” folder and click the “Open” button.