Filter
Top Products
97
7
96
The “Camera Connection” section explains how to connect the camera to your computer using the included
USB cable and describes the functions you can use once the camera and computer are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the AC
power adapter when connecting the camera to a computer.
Refer to Section 6 the first time you connect the camera to your computer.
Do not connect the camera with the computer before installing all the software.
This mode provides a simple way to read images from an xD-Picture Card and store images on to an xD-
Picture Card (➡P.98).
CD-ROM
(Software for FinePix SX)
(
DSC
(
Mass storage device
)
mode
This function allows you to conduct videoconferencing sessions between PCs connected to the Internet.
●
!
Videoconferencing (“PictureHello”) is not supported on Macintosh computers.
●
!
Connection is only possible with a FUJIFILM camera equipped with a “PC Camera” function.
q
PC
PC CAM
(
PC camera
)
mode
7.1.3 Connecting to a computer
Continued
7.1 CAMERA CONNECTION
1
DC IN 5V socket
VIDEO OUT
socket
7.1.2 Connecting to a TV
Switch off the camera and TV. Plug the Video cable
(provided with the camera) into the “VIDEO OUT”
(video output) socket.
●
!
If there is a power outlet available, connect the AC-5V AC Power
Adapter.
●
!
Before plugging the video cable (included) into the VIDEO OUT
socket, the LCD monitor and EVF display switches off.
2
To video
input socket
Plug the other end of the cable into the video input
socket on the TV. Then switch the camera and TV on
and play back images as you would normally.
●
!
Refer to the instructions provided with your TV for more
information on video input for your TV.