Filter
Top Products
12
Basic Setup
A language-selection dialog is displayed the rst time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 71).
1
Choose a language.
SE
SET
NO
NO
STA
RT
RT
MENU
MENU
/ LANG.
/ LANG.
1.1 Press the selector up, down,
left, or right to highlight a
language.
1.2 Press MENU/OK.
2
Set the date and time.
2011
2010
2008
2007
YY.MM.DD 1. 1 12
:
00
AM
DATE / TIME NOT SET
2009
SET NO
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and press
up or down to change. To change the
order in which the year, month, and day
are displayed, highlight the date format
and press the selector up or down.
2.2 Press MENU/OK.
B
Tip: The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on. If the battery is left in the camera for about 30 minutes,
the battery can be removed for about 24 hours without resetting the clock or language selection.