Filter
Top Products
115
Troubleshooting
Troubleshooting
Miscellaneous
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Nothing happens
when the shutter but-
ton is pressed.
Temporary camera malfunction.
Remove and reinsert the batteries or discon-
nect and reconnect the AC power adapter/
DC coupler.
8
The batteries are exhausted. Insert fresh or fully-charged spare batteries. 8
The camera does not
function as expected.
Temporary camera malfunction.
Remove and reinsert the batteries or discon-
nect and reconnect the AC power adapter/
DC coupler. If the problem persists, contact
your FUJIFILM dealer.
8
I want to use an AC
power adapter and DC
coupler overseas.
Check the label on the AC power adapter.
The AC power adapter can be used with volt-
ages of 100–240 V and power frequency of
50/60Hz. However, power outlets differ de-
pending on the regions. Consult your travel
agent for information on plug adapters.
—
Date and time added
by S DATE STAMP
are not correct.
The camera clock is not correctly set. Reset the date and time. 14
Date and time are
added to the pictures.
T + U or T is selected for S DATE STAMP
option.
Added shooting date and time can not
be deleted from the pictures. To take pic-
tures without date and time, select OFF for
S DATE STAMP.
105
FinePixViewer can not
be installed or run.
Some operation systems are not supported by
FinePixViewer.
FinePixViewer does not support Mac OS X
10.7 or later. Use the application supplied
with Mac OS X or third-party software.
—