Fujitsu fi-6130Z Photo Scanner User Manual


 
2
Safety Information
The attached Safety Precautions manual contains
important information about the safe and correct
use of this product. Make sure that you read and
understand it before using the scanner.
Symbols Used in This
Manual
The following symbols are used in this manual.
Removing the Protective
Packaging
The scanner is secured with orange protective
tape. Peel off the tape before using the scanner.
Installing the Software
The following software are bundled with the
scanner:
z TWAIN Driver
Conforms to the TWAIN standard. Used when
you operate the scanner using TWAIN-
compliant applications.
z ISIS Driver
Conforms to the ISIS standard. Used when you
operate the scanner using ISIS-compliant
applications.
z Kofax VRS Professional
(hereinafter referred to as “Kofax VRS”)
An application that allows you to generate high
-quality images by automatically correcting
skewed images and characters blurred by
coloring and shading. Kofax VRS uses ISIS
driver which is installed together with Kofax
VRS.
z Software Operation Panel
Configure various settings such as the
operation of the scanner and managing the
consumables. Installed together with the
TWAIN driver, ISIS driver and Kofax VRS.
z Error Recovery Guide
Shows the error status and countermeasures
when an error occurs. Installed together with
the TWAIN driver and ISIS driver.
z Image Processing Software Option (Trial)
A software option featuring advanced
binarization of scanned images.
z ScandAll PRO
An image scanning application which supports
both TWAIN and ISIS drivers. By defining scan
settings as profiles, you can customize the
settings according to your preference.
z ScandAll PRO ScanSnap mode Add-in
(hereinafter referred to as “ScanSnap
mode”)
An add-in application which provides a
different set of driver settings as an alternative
to using ScandAll PRO. TWAIN driver is
required to use this application. Enables easy
scanning with a single button. ScandAll PRO
must be installed in order to install this
software.
Symbol Description
WARNING
This indication alerts operators to
an operation that, if not strictly
observed, may result in severe
injury or death.
CAUTION
This indication alerts operators to
an operation that, if not strictly
observed, may result in safety
hazards to personnel or damage
to the product.
This symbol alerts operators to
particularly important information.
Be sure to read this information.
This symbol alerts operators to
helpful advice regarding
operation.
Bundled Software