49
Trim
The Trim setting allows you to trim an area of a selected photo
and save it as a new photo.
To trim a picture:
1. Select cutting function.
2. Select “Yes” to conrm cutting, use the zoom lever and
direction buttons to select the part to be cut, and to select
the desired photo.
3. Press
SET
button and ‘Save Change?’ will appear. Select
“ ” to conrm changes and save it as a new image, or
select “ ” to cancel changes and return to the previous
menu.
The image cannot be cropped again when it is cropped
to 640 x 480.
Red-Eye Reduction
Use this setting to remove red eye in your photos.
1. In the playback mode, press Left/Right button to select the
photo which needs red-eye reduction.
2.
In the
func
menu
menu, select to set, press
SET
to enter
setting screen.
3. Press Left/Right button to select corresponding menu, or
cancel and return playback menu.
:
Red-Eye Reduction
:
Cancel
4. Press the
SET
button to conrm the setting.
For best results, the face of the subject should be
relatively large on the LCD screen, the subject should be
facing the camera, and the eyes should be as large as
possible.