Filter
Top Products
Installing the Bracket and Camera KTC-117/217/247 User Manual
12 1041075C / November 2003
4.3 ADJUSTING THE CAMERA ANGLE
1) If necessary, turn the wing nut (Figure 8) on the bracket
counterclockwise to free the ball and socket bolt (Figure 8). See
Figure 11.
2) Swivel the camera on the ball and socket bolt to adjust the camera
angle. See Figure 13.
3) Turn the wing nut clockwise to tighten it and secure the camera
position. See Figure 14.
Figure 13. Adjusting the angle of the
camera with the ball and socket bolt
Figure 14. Tightening the wing nut to
secure the camera position