Filter
Top Products
Hardware and firmware requirements 4
Hardware and firmware requirements
HP Virtual Connect Manager firmware
The latest HP Virtual Connect Manager firmware package (version 1.16) contains the following firmware
versions:
• HP 1/10Gb VC-Enet version 1.16
• HP 4Gb VC-FC version 1.02
IMPORTANT: The VC-Enet module firmware must be updated to version 1.15 before updating
the VC-FC module firmware. Otherwise, the VC-FC firmware might not appear to be
successfully updated.
Supported hardware
Versions 1.15, 1.15b, and 1.16 of HP Virtual Connect firmware support the following hardware:
• Virtual Connect modules
o HP 1/10Gb Virtual Connect Ethernet Module
o HP 4Gb Virtual Connect Fibre Channel Module
• Server blades
o HP ProLiant BL460c Server Blade
o HP ProLiant BL480c Server Blade
o HP ProLiant BL465c Server Blade
o HP ProLiant BL685c Server Blade
o HP Integrity BL860c Server Blade (only supported by Virtual Connect v1.16)
• HP BladeSystem c-Class c7000 Enclosure with Onboard Administrator
• Integrated Network Interfaces and mezzanine cards
o HP BladeSystem Dual NC370i Multifunction Network Adapter
o HP NC373i Integrated Multifunction Gigabit Server Adapter
o HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
o HP NC326m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC325m PCI Express Quad Port Gigabit Server Adapter
o HP QLogic QMH2462 4Gb FC HBA for c-Class BladeSystem
o HP Emulex LPe1105-HP 4Gb FC HBA for c-Class BladeSystem (Microsoft® Windows® and
VMware ESX 3.01)