Filter
Top Products
My image is blurry.
•Use Focus Lock (see “
Using Focus Lock” on page 12).
•
Use
Steady Photo shooting mode (see Steady Photo under “Using the Picture
Capture and Video Record menus” on page 15).
• Use a tripod to hold the camera steady, or improve lighting conditions.
• Set the flash to
Auto Flash or Flash On and set the shooting mode to
Action.
My image is too bright.
• Turn the flash off (see “
Setting the flash” on page 14).
• Move back from the subject and use zoom.
My image is too dark.
• Wait for natural lighting conditions to improve, use the flash (see “
Setting the flash”
on page 14) or add indirect lighting.
• If the subject you are trying to capture is outside the flash range, turn off the flash.
This causes a longer exposure time, so use a tripod or hold the camera steady. For
information about flash working distance for this camera, go to
www.hp.com/
support, select your language and region, enter your camera model number in the
Search: Product field, click Product Information, then click Specifications.
My image is grainy.
• Add indirect lighting, use the flash (see “
Setting the flash” on page 14), or wait for
natural lighting conditions to improve.
•
Using
Steady Photo shooting mode can increase graininess (see Steady
Photo under “
Using the Picture Capture and Video Record menus” on page 15).
• You may have zoomed in too far using digital zoom (see “
Digital zoom”
on page 13).
• If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory. If so,
transfer the images to the memory card (see Move Images to Card under “
Using the
Playback Menu” on page 19).
My image is blurry. 35