Filter
Top Products
99
Transferring and Printing Images
Printing Images Directly from the
Camera
You can connect the camera using the cradle or
dock to any PictBridge-certified printer to print still
images and frames saved from a video clip (see
page 86). To determine if your printer is
PictBridge-certified, look for the PictBridge logo.
1. Check that the printer is turned on, there is paper in the
printer, and there are no printer error messages.
2. Connect the larger, flat end
of the USB cable to the
corresponding connector on
the PictBridge-certified
printer.
TIP: The PictBridge connector is
usually located on the front of
the printer.
3. Attach the other connector to
the cradle or dock.
4. Set the camera’s USB Configuration setting to Digital
Camera (see page 120), then place the camera in the
cradle or dock.
5. When the camera is connected
to the printer, a Print Setup menu
displays on the camera. If you
already selected images to print
using the camera’s HP
Instant
Share Menu, the number of
images selected is shown.
Otherwise, Images: ALL is displayed.