Hitachi DZ-B35A Camcorder User Manual


 
English
35
RESETTING MENU SETTINGS TO DEFAULTS (RESET)
You can restore menu settings to defaults (initial settings at the factory (p. 147)). (Note, however, that
the date/time will not be reset.)
1 Choose “Reset” on the
“Initial Setup” menu
screen, and then press
the A button.
The screen for verifying reset will appear.
2 If you are sure that you
wish to reset, use the
d button to choose
“YES”, and then press
the A button.
The setting items have now been reset to
defaults.
Note:
To cancel resetting midway, choose “NO” on the screen
for verification in step 2 or press the C button.
TURNING RECORD LED ON OR OFF (RECORD LED)
You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select “On” or “Off”, and
then press the A button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.
Note:
The Record LED setting will not appear in the on-
screen information display.
The Record LED setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
Specify “Record LED: Off” when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
Even if “Record LED Off” is specified, the recording
indicator will light while the self-timer is counting
down.
CHANGING SETTING OF DEMONSTRATION
1 Press the MENU
button, choose “Initial
Setup”, “Demo Mode”,
and then press the A
button.
2 Press the f or e button to choose the
desired option, and then press the A
button.
3 Press the MENU button again to exit setting.
Note:
Pressing the C (STOP/EXIT) or DISC NAVIGATION
button will exit demonstration.
If you choose “Auto”, the demonstration will not start if
a disc is loaded with the power switch set to “O” or
N”, or a card is loaded with the power switch set to
P”.
The demonstration function will not work when the
DVD video camera/recorder is connected to PC (DZ-
GX3300A/GX3200A/GX3100A/BX37A only).
While the demonstration is being given, the recording
indicator will blink.
Record LED
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Initial Setup
On
Off
On
English
Auto
ENTER
Reset?
YES NO
Reset
Record LED
On
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Initial Setup
On
Off
Auto: To start demonstration if the DVD
video camera/recorder is inactive for
approx. 3 minutes after it is turned on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
ENTER RETURN
Demo Mode
Reset
Record LED
Power Save
Beep
Language
Initial Setup
Auto
Off
Start