Filter
Top Products
8
i) (MASKING) G HUE (CSR: F200 0044 h)
-Manual adjustment-
Setting value 820000xx h xx: 00h to FFh (standard 80h)
j) (MASKING) C HUE (CSR: F200 0048 h)
-Manual adjustment-
Setting value 820000xx h xx: 00h to FFh (standard 80h)
k) (MASKING) B HUE (CSR: F200 004C h)
-Manual adjustment-
Setting value 820000xx h xx: 00h to FFh (standard 80h)
l) (MASKING) M HUE (CSR: F200 0050 h)
-Manual adjustment-
Setting value 820000xx h xx: 00h to FFh (standard 80h)
(2) PAINT BLACK
Color level of R,G, and B can be separately varied.
* This function is only for KP-FD140F and KP-FD32F.
a) (PAINT BLACK) RED (CSR: F200 0120 h)
-Manual adjustment-
Setting value 820000xx h xx: 00h to FFh (standard 00h)
Color level of RED is adjusted manually. Color level is reduced at 00h side and raised at FFh side.
b) (PAINT BLACK) GREEN (CSR: F200 0124 h)
-Manual adjustment-
Setting value 820000xx h xx: 00h to FFh (standard 00h)
It is same as RED.
c) (PAINT BLACK) BLUE (CSR: F200 0128 h)
-Manual adjustment-
Setting value 820000xx h xx: 00h to FFh (standard 00h)
It is same as RED
2-2. Setting of other function related CSR
(1) PORT1 (CSR: F200 0000 h)
-OFF-
Setting value 80000000 h
-SELECT INPUT/OUTPUT SIGNAL-
Setting value 8200000x h x: 0- TRIGGER IN, 1- STROBE OUT, 2- VD OUT, 3- PORT2 OUT
Input and output signal is switched at value of x. When TRIGGER SOURCE is PORT1, x is set to TRIGGER IN
automatically.
PORT2 (CSR: F200 0004 h)
-OFF-
Setting value 80000000 h
-SELECT INPUT/OUTPUT SIGNAL-
Setting value 82000000x h x: 0- TRIGGER IN, 1- FLUSH OUT, 2- VD OUT, 3- PORT1 OUT
It is same as PORT1.
(2) READOUT SET (CSR: F200 0008 h)
Set readout source for mode 14 (Reset control) trigger operation.