Filter
Top Products
......._ t ¸ i_'_'_'_
¸
"SEPIA": Sepia Mode
The entire picture wilt be sepia.
Note: To switch the mode of return to the normal picture during tape dubbingl temporarily stop the dubbing and 1
press the EFFECTS button.
Note: When tape stops, the normal picture will be restored.
Multi Playback
This camcorder can convert on NTSC recorded tape into "PALdO" format signal. "PALdO"is a special output
signal format with which a PAL TV can be used to view a tape recorded on on NTSC recorder.
Connecting to a PAL Television
1 Connect the camcorder to TV as shown in the figure.
2 Turn the TV on and select the TV "video input". Set the TV to the PALd0 mode.
3 Set the CAM/OFF!VIDEO switch of the camcorder to VIDEO.
4 Press the PALd0 button.
5 Press the PLAY button of the camcorder. If you press the DATE/DISP. button at this time, "PALd0" will appear
in the viewfinder or on the LCD monitor.
6 When playback is finished, set the CAM/OFF/VIDEO switch to OFF position.
connect the Camc0rder to a TV monitor which has a Vertical sync adjustment Circuitry(v0tume) for60 Hz
Note:
and which can also be loCked !nto the PALd0 mode. Refer to the TV instructi0nmanual for details On h0wto set
the TV: "
Note: This Camc0rder Cannot record using the PALd0 systeml
Note: A black-and-white picture will appear on the LCD monitor when playing back tape with the PALd0 system. I
39