Filter
Top Products
Advanced Techniques - 32 -
Fading Out
1. While recording with the camcorder use the FADE button to select a fade option.
2. Press the Start/Stop button to stop recording; the fade begins automatically and REC flashes until the fade
ends.
Note: When fading out be sure to wait until the PAUSE indicator ( ) is visible in the viewfinder before
attempting to put the camcorder into the record mode again.
Using 16x9
Pressing the 16x9 button during recording or recording pause fades the top and bottom of the picture in the
viewfinder to black.
• "16x9" is displayed in the viewfinder.
• When the 16x9 button is pressed again, "16x9" disappears and the normal picture is restored.
Using Instant Review
Use this feature to view the last few seconds of the tape you shot.
1. Set the camcorder to record/pause mode and tap the REW button. The last few seconds of tape play back in
reverse and then in normal playback mode.
2. The camera plays back to the spot where you paused and returns to record/pause mode (standby). Press the
Start/Stop button to resume recording.
Using Quick Edit