Filter
Top Products
! Cautions in SENS mode
1. In high sensitivity mode , moving object is displayed as if it is flowing,
because the integration time of the CCD becomes long.
Further, movement is unnatural due to intermittent read-out.
2. In high sensitivity mode, white blemishes may be remarkable.
3. In high sensitivity mode, noises as well as video information are increased.
When an ambient temperature becomes high, noises are further increased.
This is not due to failure.
4. In PAL version, flickers may be remarkable for some objects in high
sensitivity mode, because the electronic sensitivity amplification is employed.
5. It doesn’t work in FL mode.
⑥ “FL” Mode ( Flickerless )
Use for removing the flicker of picture.
-. In case of NTSC(60Hz) :
Fix Shutter Speed to 1/100 sec
-. In case of PAL (50Hz) :
Fix Shutter Speed to 1/120 sec
⑦ “BLC” Mode ( Backlight Compensation )
Too bright light or sunlight behind the object makes the object appear dark .
-. In BLC ON state, you can distinguish
the objects in front of the bright area
without darkness.
-. Do not use the BLC function if using
the Low-light mode with manual Iris Lens.
17
17
18
18
FL
OFF
ON
BLC
OFF
ON