Filter
Top Products
-20-
⑤Freeze Mode
: It pause current image. ON is to stop, OFF is to return to normal
state.
FREEZE ON → OFF → ….
☞ caution
1. Freeze image does not save when you reset the system.
This system doesn’t have its’ own memory.
⑥ BAUD RATE
: Use to communicate through RS232C, RS485, RS232TTL .
BAUDRATE 4800bps → 9600bps → ….
→ 312kbps
☞ caution
1. If the Baud Rate does not match between Camera and external
system, it may occur the communication failure. Please make
sure a proper Baud Rate.
⑦ PROTOCOL Setting
: Setting the PROTOCOL with communication device.
PROTOCOL DEFAULT → VCL → KD6 → P/D → ….
⑧ Function OSD Display
OSD DISP ALL → NONE → TOP →
BOTTOM → ....
ALL : Whole Function OSD display
( Focus Mode, Key state, Zoom Ratio, ID )
TOP : Only Upper OSD display ( Focus Mode, key
state )
BOTTOM : Only Lower OSD display ( Zoom Ratio, ID )
NONE : All the OSD will not display except MENU
OSD.
☞
Caution
1. The display of ID and TITLE can be only set in CAMERA ID
SETTING.
5.13 Initial Set
: Set the INITIAL SET Mode ON so that all changed data are
returned to shipping condition. For Initialization, select “YES?” by
using NEAR, FAR key and push MENU key. Select “NO?”
and push MENU, no initialization and return to Main Menu.
☞ caution
1. Make sure when Initialization set as “YES?” , all changed data are
return to shipping condition.
2. Some menu as ID,TITLE, etc are not initialized.