Insignia NS-DSC10SL Digital Camera User Manual


 
5
Turning the power on and o
1 Press and hold the PO WER button until the startup image
displays. If sounds are enabled, the startup sound plays and the
zoom lens extends.
2 Press the POWER button again to turn the camera o .
Taking photos
NOTE: The zoom lens does not extend if the mode slider is set to Playback
mode when the camera is on.
To take a photo:
1 Turn the camera on, then
slide the mode slider to
(Photo mode).
2 Press the POWER button to
turn the camera on.
3 Frame the shot using the
focus bracket on the LCD
screen.
4 Press the shutter button halfway. The camera automatically
adjusts the focus and exposure. When the camera is ready
to capture the image, the focus bracket turns green, and the
aperture value, shutter speed, and ISO setting are displayed.
5 Press the shutter button to capture the image.
NOTE: If the shake warning icon ( ) appears, hold the camera steady, with
your arms at your side, or use a tripod to stabilize the camera and prevent
blurred images.