Filter
Top Products
6
Insignia SC/MMC/MS Memory Card Reader NS-CR2031
www.insigniaproducts.com
2 Insert a card into the appropriate slot, as shown in the table on page 4.
A new drive appears on the desktop.
3 Double-click the new memory card icon. Use normal Mac procedures
for opening, copying, pasting, or deleting files and folders.
To remove a memory card using Macintosh:
1 When you have finished working with the files on the memory card,
drag the memory card icon to the Eject icon or click the memory card
icon on the desktop and select Eject.
2 Carefully remove the memory card.
Data LED
Indicates when a slot is reading from or writing to a card.
• LED off–Your card reader is not being used
• LED on–A card is inserted in one of the slots
• LED flashing–Data is being transferred to or from a card and the hard
drive, or another card
Formatting a memory card (Windows)
If your computer has trouble recognizing a new memory card, format the
memory card in your device (refer to the documentation that came with
the device) or by using the following procedure.
To format a memory card:
1 Click Start, then click My Computer or Computer.
2 Right-click the appropriate memory card drive.
3 Select Format.
Caution
Cards must be inserted into the correct slot and in the correct
direction, otherwise, you may damage the card and/or the slot.
Cards inserted into the microSD and MS are inserted label side
UP. Cards inserted into the SD slot must be label side DOWN.
Caution
Do not insert or remove memory cards while the blue data LED
on the reader is flashing. Doing so may cause damage to your
card or loss of data.
Caution
Formatting a memory card permanently deletes all files on the
card. Be sure that you copy any valued files to a computer before
formatting a memory card. Do not disconnect the card reader or
remove the memory card while formatting is in progress.
NS-CR2031_14-0030_MAN_V1_ENG.fm Page 6 Thursday, May 22, 2014 1:49 PM