Insignia NS-DPF10PR Digital Photo Frame User Manual


 
43
www.insigniaproducts.com
Remote control does
not work.
Be sure to remove the plastic tab from the
remote control's battery compartment
before using the remote control for the
first time.
The battery is dead. Replace with a
CR2025 battery, then pair with the frame
as described below.
The remote control is not correctly paired
with the frame. From the Home menu,
select the Setup menu, then select
Factory Settings. Select RF Learn
Mode, then select Yes. Follow the
on-screen instructions to pair your remote
with your frame.
Problem Solution
NS-DPF8PR-DPF10PR_09-0561_MAN_ENG_V1.fm Page 43 Wednesday, July 22, 2009 3:50 PM