Insignia NS-DSC10B Digital Camera User Manual


 
3
Installing batteries
1 Open the battery cover by sliding it in the direction indicated by the
arrow.
2 Insert two AA batteries with the positive (+) and negative (-) terminals
matching the directions indicated inside the battery compartment.
3 Close the battery cover.
Inserting a memory card
1 Open the battery cover.
2 Insert an SD or SDHC card with the
metallic part facing the back of the
camera and the connectors pointing in.
3 Close the battery cover.
Note: To remove the card, gently press on the edge of the
card and release it. Pull the card out and close the battery
cover.
Turning the power on and o
1 Press and hold POWER to turn the camera on.
The lens extends and the Insignia startup image is displayed
on the LCD.
2 Press POWER
again to turn the camera off .