Filter
Top Products
32
NETWORK SETTING
Network IP Camera Name The default camera name is “IPCamera_MJPEG”. It is recommended to change
to a meaningful name for the Camera.
IP Address The wizard will auto setup an available IP Address to the Camera. For example:
if the IP address of the network is 192.168.2.x, the wizard will search an
unused IP Address from 192.168.2.0 to 192.168.2.250 and assign the Camera
an available IP Address. You are allowed to enter another IP Address to change
the setting.
Subnet Mask The wizard will auto search the Subnet Mask setting of the network and set the
Camera in the same Subnet Mask. You can enter another Subnet Mask to
change the setting.
Gateway The wizard will auto search the Gateway setting of the network and set the
Camera to use the same Gateway. You can enter another Gateway to change
the setting.
DNS Server DNS Server (Domain Name Server) that translates names to IP addresses. Set the
same DNS Server as the PCs on your LAN.
Video Port It defines the video stream port. The default value is “4321”.
Cancel Click “Cancel” to stop wizard setting.
Finish Click “Finish” to complete the Camera setting.
USING THE ADMINISTRATOR UTILITY