Filter
Top Products
5
4.3 INSTALLATION PROCEDURE
1. Unpack the SOHO Network IP Camera package and verify that all the items listed in the
Chapter 2 are provided.
2. Connect the Camera to your network by attaching the network cable from the switch/router
to the LAN port of the Camera.
3. Connect the power adapter to the Camera and plug the power adapter into a power outlet.
The Camera will be powered on. When the Camera is ready, the Ready LED will turn amber
in color.
Note: It is highly recommended to use the power adapter shipped with the SOHO Network
IP Camera, do NOT use any other power adapter from any sources.
5. SOFTWARE INSTALLATION
Follow the simple steps below to run the Install Wizard to guide you quickly through the Installation
process. The following installation is implemented in Windows XP. The installation procedures in
Windows 98SE/Me/2000/Server 2003 are similar.
1. Insert the CD shipped along with the SOHO Network IP Camera into your CD-ROM drive.
The “Autorun.exe” program should be executed automatically. If not, run “Autorun.exe”
manually from “Autorun” folder on the CD.
SOFTWARE INSTALLATION