Filter
Top Products
- 11 -
CHAPTER 3
ACCESSING THE CAMERA
3.1 Using IP Finder
The camera comes with a conveniently utility, IP Finder, which is
included in the Installation CD-ROM, allowing you to search the
camera on your network easily.
1. Insert the Installation CD-ROM into your computer’s CD-ROM
drive to initiate the Auto-Run program.
2. Click the IP Finder item to launch the utility. The control panel
will appear as below.
3. Once you get the IP address of the camera, launch the Web
browser or Ultra View to access your camera.
Display the connected
camera(s)
Double click to link the
camera
Click Search to find the IP address of the connected camera(s).
Click Change IP to modify the IP address of the selected camera.
Click Exit to close the utility.