Filter
Top Products
7
Loading batteries
Digital SuperPro 640 uses 4 standard AAA batteries.
To load the batteries
1 Locate the battery cover on the bottom of the camera.
2 Press the cover down and push it sideways, in the direction of the arrow.
3 Flip the cover open.
4 Insert the batteries with the positive terminals toward the + signs, and the
negative terminals toward the – signs.
5 Flip the cover closed.
Note Remove the batteries if you will not be using the Digital SuperPro
640 for an extended period of time. This prevents corrosion or
battery leaks.
Turning the camera on and off
Turn the camera on and off using the Power button on the top of the camera.
To turn on the camera
1 Click the Power button.
2 Hold it down for a moment.
3 Check that the camera is on by
looking for the green Power display light on the back of the camera.
To turn off the camera
The Power button is used for turning the camera both on and off. When the
camera is on, pressing the Power button will turn it off.
Note After the camera is switched off, the flash display light may stay lit for
up to a minute. It will turn itself off as the flash gradually discharges.
User Manual Digital SuperPro 640
2 The Camera
Power