![](http://pdfasset.owneriq.net/1/f4/1f4837c5-1a23-484a-b96a-d56cecc3ca76/1f4837c5-1a23-484a-b96a-d56cecc3ca76-bg13.png)
- 18 -
CV-M536/538/539
7.4. Location of SW2 and Jumpers
Jumpers are shorted with a 0 Ohm resistor or by a soldering between the 2 points. To remove the solder
tin from a jumper position, use a special tin remover such as de-soldering wick.
7.4.1. Board PK8054 Side B
7.4.2. Board PK8057 Side A
R127