Filter
Top Products
- 21 -
CV-M532
10. Specifications
Scanning system EIA 525 lines
30 frames/sec.
CCD sensor Monochrome "1/3" Hyper HAD IT CCD
Sensing area 4.9 mm (h) x 3.7 mm (v)
Effective pixels 768 (h) x 494 (v)
Elements in video output 758 (h) x 486 (v)
Cell size 6.35 (h) x 7.4 (v) µm
Resolution (horizontal) 570 TV lines
Resolution (vertical) 485 TV lines
Sensitivity on sensor 0.2 lx
S/N ratio >56 dB (AGC off, Gamma 1)
Video output Composite VS signal 1.0 Vpp, 75 Ohm
Gamma 0.45 or 1.0
Gain Manual – Automatic. 0 to +15 dB by potentiometer or AGC
Scanning 2:1 interlace – non-interlace
Accumulation Field – frame
Synchronization Int. X-tal. Ext HD/VD or random trigger
HD sync. input/output 4V, 75 Ohm*
VD sync. input/output 4V, 75 Ohm*
Trigger input 4V, 75 Ohm*
Trigger input duration >64 µsec to <1 msec.
WEN output (write enable) 4V, 75 Ohm
EEN output (exposure enable) 4V, 75 Ohm
Pixel clock output (optional) 4V, 75 Ohm sine
Normal shutter Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Edge pre-select shutter 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Pulse width controlled shutter >1 H (64 µsec.) to <60 msec.
Start/stop trigger shutter 1/77 sec to 1/10,000 sec.
Long time exposure 1 field to ∞. Duration between ext. VD pulses
Operating temperature -5°C to +45°C
Humidity 20 – 80% non-condensing
Storage temp./humidity -25°C to 60°C/20 - 90%
Power 12V DC ±10%. 3.7W
Lens mount M10.5 x 0.5
Dimensions (camera Head) ø12x 50 mm
Mass 230 g
* HD sync., VD sync./(Trigger) input or output by internal jumpers.
Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by
internal jumpers. Factory setting: 75 Ohm terminated.
Note: Above specifications are subject to change without notice.
10.1. Spectral Sensitivity
400 500 600 700 800 900
Wave length (nm)
1.0
0.8
0.6
0.4
0.2
0.0
Relative response
1000