Filter
Top Products
IIT Camera System Manual
14 Introduction
Vehicles are detected from both driving directions (front or rear shots). The system will only work
if the license plate is moving through the retro-reflective sensitive region of the picture area.
Other parts of the vehicle being retro-reflective can cause generation of triggers. These parts can
be the tail light or stickers of different kinds.
Besides the special IIT functions, many of the I/O Board functionalities from VIS-CAM 300/350/400
are available. This includes output for camera heater, output for external flash and 24V auxiliary
output.
If only the IIT trigger functionality is used (excluding the internal light sensing feature), the camera
can be mounted together with an external light sensor. For details regarding Light Sensor
positioning and configuration, please refer to VIS-CAM System Installation manual.
The J-Panel (Junction Panel) described in the VIS-CAM System Installation manual is also applicable
in conjunction with the IIT camera.