Filter
Top Products
16
Interference on camera picture
1. Make sure each camera (transmitter) is within
range, and that no large obstructions are blocking
the signal.
2. Try repositioning the camera, LCD monitor or both
to improve the reception quality.
3. Reposition other nearby equipment transmitting
on the 900MHz frequency.
4. Adjust the antenna for the camera, LCD monitor
or both to obtain best image.
Audio problems
1. Ensure the volume is turned up suffi ciently on
the monitor
2. Make sure the sound is within the microphone
range.
3. If the units emit a loud wailing sound (feeds back),
try moving the camera away from the LCD monitor
or angle the monitor differently.
SPECIFICATIONS
(Subject to change without notice.)
CAMERA
TV System: ....................................................................................NTSC standard
Image Sensor: .......................................................................................1/3” CMOS
Integrated Lens: .....................................................5.6mm, F1.8 fi xed focus
Resolution: ...................................................................360 horizontal TV lines
Frequency Range: ........................................................................902~928MHZ
High Speed Electronic Shutter: ..................................1/60-1/15,000 sec