JOBO PDJ120 Digital Photo Frame User Manual


 

2.2. Viewing Picture
1. You can use either the remote control or the on-board buttons to control the Photo Display.
2. Remove the plastic battery insulator (if any) on the bottom of the remote control and make sure the remote control has a battery
installed. See “Installing and replacing battery” section if you need a new battery.
3. Use the remote control to highlight and select the Photo folder (Use the direction keys Right, Left on the remote control to
navigate and press Enter to select).
4. Highlight a picture and press Enter to view the picture.
5. Press “PLAY” button to view the picture sequential.
2.2.1. Buttons






Right






Up






Left






Down






Confirm






Play
2.2.2. Remote Control




  
1. Power ON/OFF
2. SETUP (enter settings menu)
3. Up
4. EXIT
5. Left
6. Enter
7. Right
8. Rotate (rotate images)
9. Down
10. Brightness (Change brightness, contrast and saturation)
11. Zoom (Zoom into images)
12. Confirm
13. Plus (in Brightness menu)
14. Slideshow (switch between Slideshow and Pause)
15. Clock / Calendar (switch between Clock and Main Menu)
16. Minus (in Brightness menu)