Filter
Top Products
EN43
MAKE CONNECTIONS
1
CONNECT TO . . .
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE OR
Connect the editing cable to the RM-V700U’s
PAUSE-IN connector.
2
PREPARE CAMCORDER
Insert a recorded tape and set the Power Switch to
“PLAY”.
3
PREPARE VCR
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●
If your VCR has an S-Video input connector or a SCART
connector compatible with Y/C signals, connect the
camcorder and the VCR using the optional S-Video
cable. This can improve the dubbed picture quality.
●
If you use the provided cable adapter, set the “Y/C”/
“CVBS” video out select switch as required.
Y/C : When connecting to a VCR which accepts Y/C
signals and uses an S-Video cable.
CVBS : When connecting to a VCR which does not
accept Y/C signals and uses an audio/video
cable.
CONTINUED ON NEXT PAGE
Open the cover.
To Remote
PAUSE
To J
terminal
(JLIP)
RM-V700U
(optional)
VCR
TV
To PAUSE-IN
Open the
cover.
Editing cable
(optional, ø3.5
mini-plug cable)
Audio/Video
(A/V) cable
(optional)
To S-Video
output
connector
If your VCR has the
SCART connector,
use the provided
cable adapter.
“Y/C”/“CVBS”
video out select
switch
S-Video
cable
(optional)
To Video
output and
Audio
output
connectors
To AUDIO
(L/MONO),
VIDEO and
-IN
connectors