JVC GR-D290 GR-D270 Digital Camera User Manual


 
EN 37
MasterPage: Start_Right
ADVANCED FEATURES
FEATURES FOR RECORDING
LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
1 Press LIGHT repeatedly to
change the setting.
OFF: Turns off the light.
ON: The light is on always. ( appears.)
AUTO: The light turns on automatically when
dark. ( appears.)
2 Press the Recording Start/Stop Button to
start video recording or SNAPSHOT to shoot a
still image.
NOTES:
Be careful not to point the LED Light directly to
eyes.
If the light does not reach the subject, the Night-
Alive function will be activated, and makes it
possible to shoot the subject brighter.
There is a difference in the brightness of the
images shot between the centre area which is
illuminated by the LED Light and the surrounding
areas (which will be darker).
Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
This feature is useful for recording or playing
back precious or hard-to-see moments at a slow
speed. Sound is recorded and played back in
real time.
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
2 Set “SNAP/SLOW” to “SLOW”.
(pg. 31, 32) The Live Slow indicator “
appears.
3 Press SLOW during recording or playback.
The moving pictures are divided into four
frames. They are recorded or played back for
1.5 seconds, and then normal recording or
playback resumes.
Record a vacation or an important event in 5-
second clips to keep the action moving. This
function is available only for video recording.
1 Set “5S” to “5S”. (pg. 33)
The “5S” indicator appears.
2 Press the Recording Start/Stop Button to
start recording, and after 5 seconds the
camcorder enters Record-Standby mode
automatically.
Even if you press the Recording Start/Stop Button
again within 5 seconds after recording starts,
Record-Standby mode is not engaged.
3 To exit the 5S mode, select “OFF” in step 1.
To take a snapshot in the 5-second recording
mode
Instead of pressing the Recording Start/Stop
Button in step 2, select the desired Snapshot
mode in CAMERA Menu (pg. 32), then press
SNAPSHOT. The camcorder records a 5-
second still. When “5S” is set to “Anim.”, this
function is not available.
NOTE:
When “5S” is set to “Anim.”, the 5-Second
Recording mode is not available. Animation
recording of a few frames only is taken instead.
LED Light
Live Slow
LED Light
5-Second Recording
GR-D290_270US.book Page 37 Tuesday, November 30, 2004 9:53 AM