Filter
Top Products
92 EN
Indications Function
●Appears if dubbing of copyguarded signals is attempted while this
camcorder is being used as a recorder.
●Appears in the following cases when dubbing from a tape to a
MultiMediaCard (as digital stills or video clips):
– when no MultiMediaCard is loaded.
– when the MultiMediaCard's memory is full.
– when the MultiMediaCard is not formatted.
●Appears in the following cases when dubbing still images or sound effects
stored in the MultiMediaCard’s memory to a tape:
– when condensation occurs.
– when no tape is loaded.
– when the erase protection tab is set to “SAVE”.
– when a tape in another format is loaded.
– when the tape ends. (੬ pg. 64)
Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed
while the POWER Switch is set to “ ” and the MODE Dial is set to
“ ” or “
DUAL
”.
Appears when there is a problem with a MultiMediaCard and its memory is
corrupt, or it has not been initialised. Initialise the MultiMediaCard.
(੬ pg. 50)
Appears when the POWER Switch is set to “
M
E
M
O
R
Y
P
L
A
Y
” and there are no files
stored in the MultiMediaCard.
Appears if there are no sound files stored in the MultiMediaCard when
DIGITAL SOUND is pressed.
Appears when the POWER switch is set to “
M
E
M
O
R
Y
P
L
A
Y
” and all image files are
deleted.
Appears when the POWER switch is set to “
M
E
M
O
R
Y
P
L
A
Y
” and all E-clip recording
files are deleted.
Appears when a file in a format other than MP3 is selected.
The error indications (E01 — E06) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest JVC dealer.
NO STORED
DATA
PLEASE
FORMAT
MEMORY CARD!
E01 — E06
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
COPYING FAILED
INDEX
Indications (cont.)
NO SOUND DATA
NO STORED IMAGE
NO E-CLIP DATA
UNSUPPORTED DATA